Decorative Edges

Brass Edged & Stainless Steel Edged Covers and Frames

2part SS good.jpg (39264 bytes)Decorative edges such as brass and stainless steel can be applied to all Havestock gastight covers; with the obvious exception of circular covers. 

Havestock specialises in the manufacture of decorative edged single part covers, greasetrap covers, multipart units and trench covers.

 

ss edge doug.jpg (50963 bytes)Havestock's decorative edged covers have been installed in the surrounds of:

 


Key Benefits

Bundy SS good.jpg (59923 bytes)Decorative edges allow the access cover to be filled with decorative flooring materials such as Terrazzo, tiles, pavers, carpet & vinyl.

In these applications only the edges and the keyhole cap are visible at the completion of the job.


General Height Indications

Material General Height
Tiles 12 or 24 mm
Terrazzo 12 mm
Carpet 12 mm
Vinyl 12 mm
Split Pavers 36 or 48 mm

Example Specifications

Code Edge Height Description
A66A BE 12 600x600 Class A Brass Edged 12mm Cover & Frame
A64B SS 24 600x450 Class B Stainless Steel Edged 24mm Cover & Frame

The addition of the EDGING & HEIGHT specifications can be applied to all Havestock covers (excluding circular covers, civil covers).


Size Considerations

ss edge stack.jpg (64246 bytes)The addition of edge strips slightly increases the clear opening and overall sizes of the cover and frame. Most edges are 3mm in width and therefore increase the listed sizes by 12mm (due to edges being placed on the cover and the frame, on both sides).


Installation

The correct installation is necessary to ensure the finished look meets the designed expectations. Decorative edged covers are an engineered cating and it must be treated with respect on the job site as they can be easily damaged if not stored or handled correctly.

TELEPHONE  61 7 3216 5000       FAX 61 7 3216 5222
Postal Address
PO Box 34  Virginia  Qld 4014  AUSTRALIA
452 Newman Road Geebung Qld 4034 AUSTRALIA  
havestock@havestock.com.au

General Information: havestock@havestock.com.au
Webmaster: havestock@havestock.com.au

Copyright © HaveStock™ Pty Ltd 2008