6.0 TWO & THREE PART COVERS
Class A
Class B
Class C
Class D
Two & three part units are for
use where pits are much longer than the width (ie grease traps, cable-joining pits).
- These covers come in a standard series of
widths ( 600, 750, 900mm ) and are joined together to increase the clear
opening length.
- The forward and reverse tapers on the covers
match together to eliminate the need for cross supports.
- Covers are removed in one direction, as with
single part covers, from the front two key holes.
- Covers can be fitted with brass edges,
bolted down, inspection peep eyes.
Available as Litelift style or traditional
infill style.
