Displays A List For Class A Multiparts - Choose From Table - Width x Length       Displays A List For Class B Multiparts - Choose From Table - Width x Length       Displays A List For Class C Multiparts - Choose From Table - Width x Length       Displays A List For Class D Multiparts - Choose From Table - Width x Length

multi1.jpg (59099 bytes)Multipart covers are made up from single part covers, joined and supported by fully removable steel beams and are used when openings are too large for a single row of access covers.

 

 

  • Covers which join each other are seated on a common frame which is affixed to a removable steel beam.

  • Covers are supported at the perimeter by a permanently attached frame.

  • Covers are removed in the one direction and must be installed back into their original position.
  • Covers can be removed for total or sectional access.
  • The supporting beams are held in position be beam boxes which are cast into the permanent perimeter framework. When full access is required, these beams can be easily slid from their box housings.

multi3.jpg (45686 bytes)multi long.jpg (72834 bytes)

Copyright © 2005